3 Set ESP32 LoRa V3 Development Board + N30 Protect Case Set – with 915MHz Antenna and SX1262 LoRa V3 Devices for Meshtastic Ar duino LoRawan IOT
$7.99
Related Products
![Reborn HDMI to USB C Cable Adapter [10FT 4K@60Hz], Uni-Directional HDMI (Source) to USB-C (Monitor) with USB Power for AR Glasses XREAL One、Air 2 Pro/VITURE Pro/RayNeo Air 2s,PS5,Portable Monitors](https://hometech360.co/wp-content/uploads/2025/11/61Lajv4JMpL._AC_SL1500_.jpg)
Product description
Specially Designed Protective Case: The specially designed protective case can accommodate the ESP32 LoRa V3 development board, a copper tube antenna and 950mAh, 1100mAh and smaller batteries, providing a tight fit to ensure compatibility and safety. With transparent screen protection and Type C interface.
Advanced Connectivity: Unleash the power of wireless communication with our ESP32 LoRa Development Board. Equipped with a LoRa module, ESP32 chip, and Meshtastic compatibility, it’s perfect for IoT projects requiring long-range and low-power connectivity. Supports both LoRaWAN standard protocol and dual-mode Bluetooth
High-Performance Hardware: Power through your projects with a high-frequency 240MHz main processor, 8Mbyte FLASH, and the Xtensa 32-bit LX7 dual-core processor. The ESP32-S3FN8 main control chip and SX1262 LoRa chip ensure reliable and efficient performance
Versatile Display and Protocols: Featuring a 0.96″ OLED screen for clear display, our board supports WiFi and Bluetooth protocols, allowing for versatile applications. Its low-power design is ideal for energy-efficient projects
Extended Communication Range: Experience an impressive communication range of up to 2.8KM in open areas with our board’s support for frequency bands 915MHz. The Cp2102 USB to serial chip enhances connectivity options
Developer-Friendly Design: Crafted for creators, our board is Ar duino-compatible, supports a working voltage of 3.3~7V, and operates within a temperature range of -20~70°C. With a receiver sensitivity of -139dbm (Sf12, 125KHz), it’s designed for developers who demand precision
8 reviews for 3 Set ESP32 LoRa V3 Development Board + N30 Protect Case Set – with 915MHz Antenna and SX1262 LoRa V3 Devices for Meshtastic Ar duino LoRawan IOT
Add a review
$7.99
Gorgeous –
Great buy and great device!
If you’re just starting out with Meshtastic, this is an excellent intro device. Comes with everything you need to connect to the mesh network. Battery life seems great so far and building it was easy enough. You absolutely need to connect it to a computer and program it before using it, but it was a very easy process. This is exactly what I was looking for and the price was great! Device, case, antenna, and battery!! Very impressed
tpmcd –
Product is great, description could be improved.
I bought these to experiment with Meshtastic. The quality of the items are outstanding, they work well, etc. The description could stand a lot of improvement. Most of the photos show batteries. Several reviews praise the fact that “everything you need is included”. No batteries are included, and they must be purchased separately. I don’t mind that they are a separate item, but I wish that had been made clearer, so I wouldn’t have lost two days on my project.
Paul F. –
Cool device! Just needs a tweak.
Interesting technology ~ still learning… However, I was able to immediately improve this product with a simple modification. The Bluetooth range is really bad, like 20’ limit. The reason is the inadequate board-mounted antenna. It looks like a little ballpoint pin spring soldered to the board. Unsolder it, and replace with a 3” piece of 28 gauge insulated wire. Drill a small hole in the case for it to dangle free and your Bluetooth range will quadruple. Much better with this mod. Be careful with the solder. It’s not difficult, but you need to know what you’re doing.
R. Andrade –
Inexpensive dependable LoRa radios for Meshtastic
These are amazing LoRa radios that are easy to use and reliable. These were my first LoRa purchase; I added better antennas and solar panels, and now I have dependable LoRa nodes. The package of two is very convenient because you can place them in different locations to run your tests. Learning was easy, I used the Meshtastic app from the iOS store, and that’s all you need. And that’s the beauty of this package, it contains all you need to get started.
Old Retired Man –
The case is great. Easy DIY kit!
I really liked the kit, the case was great. The 1100mah battery was a perfect fit.The Node PCB board was working great with Meshtastic. But it started to fail after a few hours. Once the battery was at full 100% charge, the USB power meter showed it was still using a lot of current. The case was warm. I checked one of my old V3 nodes and it was using very little power, and running cool.(I own two HelTec V3 that are being used as Home Base units and they have been working great about a year now).Not sure why this new V3 was using so much power. It soon failed completely.I returned it.
Gary Lofgren –
Easy And Effective Starter Kit
This Heltec V3 was my first node to start experimenting with Meshtastic. Since I was starting from zero, getting this kit with the board, case, and battery was a no brainer to quickly get up and running for a really low cost until I could sort out how I would use it and what modifications I wanted to suit that. This is a very simple kit that does need to be assembled and does not include any type of instructions in the box. However, if you have done any type of basic research on getting started with LoRa devices, then you will not have any issues quickly assembling and flashing the unit to get started. That whole process probably only took me five to ten minutes to be up and running with it for the very first time. I have found that the included battery really isn’t large enough for all day use, so I am already upgrading to a larger enclosure to use a 3000mah battery instead. Otherwise it has been working great so far.
Timothy J –
Shipped fast!
Work as expected. Shipped fast, next day.
Jonathan Wilson –
Decent concept – support could definitely be better.
One of the two devices worked flawlessly. The assembly of the devices was relatively easy, and flashing was not difficult. One of the two devices did not emit a signal and stayed in a persistent discovery mode and would not pair. I reached out to the vendor for a solution and got in a loop of emails back and forth with no tangible solution. If both devices worked correctly, I would say the value was good for the cost. The sturdiness of the case and size were accurate and well-made, and the looks are pleasant.Recommend not buying through this vendor if their only solution is to keep you on the hook until the return window expires. Will update should I get a better solution.